Removal And Installation
WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Remove the glove compartment.
- 2.
Remove the RH instrument panel side trim panel.
- 3.
NOTE:
Instrument panel shown removed for clarity.
Working through the glove compartment opening, remove the 3 RH demister duct screws and remove the RH demister duct in 2 separate pieces.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Using a suitable tool, release the 2 retaining tabs and detach the HVAC module from the bracket.
 Courtesy of FORD MOTOR COMPANY
|
- 5.
Disconnect 2 HVAC module electrical connectors and remove the HVAC module.
- 6.
To install, reverse the removal procedure.