Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2016 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1217 (Climate Control System - General Information - General Procedures, Removal And Installation) >> Removal And Installation >> Condenser >> Installation

Removal And Installation: Condenser: Installation

WARNING: This page is about a different car, the 2017 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Install and lubricate new O-ring seals. Refer to the appropriate SPECIFICATIONS .

  3. Lubricate the refrigerant system with the correct amount of clean PAG oil. Refer to the appropriate Refrigerant Oil Adding procedure in Climate Control System.
scientia non olet · About Mike's Workshop Manuals