Climate Control Housing: Installation

1.

To install, reverse the removal procedure.

2.

NOTE: Only use the specified material to lubricate the seals.

Install new O-ring seals.

Material

: Motorcraft® PAG Refrigerant Compressor Oil / YN-12-D (WSH-M1C231-B)

3.

Lubricate the refrigerant system with the correct amount of clean PAG oil. REFER to: Refrigerant Oil Adding

4.

Fill and bleed the cooling system. Refer to filling and bleeding without a vacuum cooling system filler. REFER to: Cooling System Draining, Vacuum Filling and Bleeding REFER to: Cooling System Draining, Vacuum Filling and Bleeding REFER to: Cooling System Draining, Vacuum Filling and Bleeding