U041E - Invalid Data Received From All Wheel Drive Control Module - DTC Chart

WARNING: This page is about a different variant/trim than selected.

U041E - INVALID DATA RECEIVED FROM ALL WHEEL DRIVE CONTROL MODULE - DTC CHART

Description: This DTC sets when network DTC concerns occur during module to module communication.
Possible Causes: Invalid data network concerns - data is transferred within the normal inter-module message, but contains known invalid data. The transmitting module logs a DTC related to the invalid data concern. Missing message network concerns - missing message concerns are logged by the module upon failure to receive a message from another module within a defined retry period.
Diagnostic Aids: Network DTC concerns occur during module to module communication. Refer to the service information , Module Communications Network, Communication Network DTC Chart to continue diagnosis.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to Pinpoint Test AE .