Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2015 >> Transit-350 HD Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Exterior Lighting System) >> Removal And Installation >> Stoplamp Switch >> Installation

Stoplamp Switch: Installation

WARNING: This page is about a different car, the 2016 Ford Transit-350 HD, 2016 Ford Transit-350, 2016 Ford Transit-250, and 2016 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    NOTE: It is very important to not press, pull or touch the brake pedal assembly during the installation of the stoplamp switch. Failure to follow these instructions may damage the stoplamp switch.

    To install, reverse the removal procedure.

  1. 2.

    NOTE: If the stoplamps do not operate correctly, repeat the removal and installation procedure with special attention not to move or touch the brake pedal during installation.

    Start the engine and apply the brake pedal several times to make sure the stoplamps operate correctly.

scientia non olet · About Mike's Workshop Manuals