Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2015 >> Transit-350 HD Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (MULTIFUNCTION Electronic Modules) >> Diagnosis And Testing >> Body Control Module (BCM) >> Pinpoint Tests >> Pinpoint Test M : DTC (Diagnostic Trouble Code) B10B2:12 >> Notes

Pinpoint Test M : DTC (Diagnostic Trouble Code) B10B2:12: Notes

WARNING: This page is about a different car, the 2016 Ford Transit-350 HD, 2016 Ford Transit-350, 2016 Ford Transit-250, and 2016 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Customer Access for schematic and connector information.

Normal Operation and Fault Conditions 

The purpose of the engine run status circuit input to the BCM is to ensure that equipment that can be powered only with engine running and prevent battery drain when the engine is off.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B10B2:12 Engine Running Relay: Circuit Short To Battery A continuous and on-demand DTC that sets in the BCM if the BCM detects battery voltage on the engine run status circuit.

Possible Sources 

scientia non olet · About Mike's Workshop Manuals