Selector Lever Cable: Removal
WARNING: This page is about a different variant/trim than selected.
- 1.
With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview
.
- 2.
Position the selector lever in DRIVE.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Disconnect the selector lever cable from the selector lever and remove the selector lever cable retainer bolt.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Disconnect the selector lever cable from the selector lever assembly.
 Courtesy of FORD MOTOR COMPANY
|
- 5.
Disconnect the selector lever cable retainer from the transmission.
 Courtesy of FORD MOTOR COMPANY
|
- 6.
Disconnect the selector lever cable from the manual lever and remove the selector lever cable bolt.
 Courtesy of FORD MOTOR COMPANY
|
- 7.
Disconnect the selector cable retainer and remove the selector lever cable.
 Courtesy of FORD MOTOR COMPANY
|