Exterior Lighting System DTCS: Stoplamps: BCMB
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1271:11 | Left Stop/Turn Inner Lamp: Circuit Short to Ground | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1271:15 | Left Stop/Turn Inner Lamp: Circuit Short to Battery or Open | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1272:11 | Right Stop/Turn Inner Lamp: Circuit Short To Ground | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1272:15 | Right Stop/Turn Inner Lamp: Circuit Short To Battery or Open | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1273:11 | Right Stop/Turn Middle Lamp: Circuit Short To Ground | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1273:15 | Right Stop/Turn Middle Lamp: Circuit Short To Battery or Open | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1274:11 | Left Stop/Turn Middle Lamp: Circuit Short To Ground | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1274:15 | Left Stop/Turn Middle Lamp: Circuit Short To Battery or Open | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1275:11 | Left Stop/Turn Outer Lamp: Circuit Short To Ground | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1275:15 | Left Stop/Turn Outer Lamp: Circuit Short To Battery or Open | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1276:11 | Right Stop/Turn Outer Lamp: Circuit Short To Ground | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| B1276:15 | Right Stop/Turn Outer Lamp: Circuit Short To Battery or Open | GO to PINPOINT TEST B : ONE OR MORE STOPLAMPS ARE INOPERATIVE OR ALWAYS ON - EXCEPT CHINA |
| U1000:00 | Solid State Driver Protection Active -Driver Disabled: No Sub Type Information | The module has temporarily disabled an output because an excessive current draw exists (such as a short to ground). The BCMB cannot enable the output until the cause of the short is corrected. ADDRESS all other Diagnostic Trouble Codes (DTCs) first. After the cause of the concern is corrected, CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. |
| U3000:49 | Control Module: Internal Electronic Failure | The module has permanently disabled an output because an excessive current draw fault (such as a short to ground) has exceeded the limits that the BCMB can withstand. The cause of the excessive current draw MUST be corrected before a new BCMB is installed. ADDRESS all other Diagnostic Trouble Codes (DTCs) first. After the cause of the concern is corrected, INSTALL a new BCMB. REFER to: Body Control Module B (BCMB) . |
| For other BCMB Diagnostic Trouble Codes (DTCs) | - | REFER to: Body Control Module B (BCMB) . |