Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2015 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Control System) >> Purge Control Solenoid Valve (PCSV) >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  4. Remove the valve (C) from the surge tank after pulling it.
    Fig 1: Identifying Purge Control Solenoid Valve, Connector And Vapor Hoses
    G09885944Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals