P0135 - O2 Sensor Heater Circuit (Bank 1 Sensor 1) - DTC Chart
P0135 - O2 SENSOR HEATER CIRCUIT (BANK 1 SENSOR 1) - DTC CHART
| Description: This DTC sets when an open or short is detected or the universal heated oxygen sensor (HO2S) current draw exceeds a calibrated limit. |
|||
Possible Causes:
|
|||
| Diagnostic Aids: Inspect the connectors for signs of damage, water ingress, or corrosion. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DZ . | ||