Mike's Workshop Manuals
: Service manuals for every vehicle
Home
>>
Ford
>>
2014
>>
Fusion Titanium, FWD
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 134 (Starting System - 2.5L)
Section 134 (Starting System - 2.5L)
WARNING:
This page is about a different variant/trim than selected.
Expand All (for easy ctrl-f)
Collapse All
Specifications
Description And Operation
Starting System - Overview
Starting System
Starting System - with Remote Start
Starting System - System Operation and Component Description
System Operation
System Diagram
Network Message Chart
Module Network Input Messages Powertrain Control Module (PCM)
Starting System
Component Description
Integrated Keyhead Transmitter (IKT)
Passive Anti-Theft Transceiver
Ignition Switch
Powertrain Control Module (PCM)
Diagnosis And Testing
Starting System
Inspection and Verification
DTC Charts
Notes
PCM DTC Chart
BCM DTC Chart
Symptom Chart(s)
Symptom Chart: Starting System
Pinpoint Test(s)
Pinpoint Test A: Engine Does Not Crank
Notes
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Pinpoint Test A: Engine Does Not Crank
Pinpoint Test B: Unusual Starter Noise
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Pinpoint Test B: Unusual Starter Noise
Pinpoint Test C: P0616 Or P0617
Notes
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Pinpoint Test C: P0616 Or P0617
Pinpoint Test D: C113A:11 Or C113A:15
Notes
Normal Operation and Fault Conditions
Possible Sources
Pinpoint Test D: C113A:11 Or C113A:15
Pinpoint Test E: P2535
Notes
Normal Operation and Fault Conditions
Possible Sources
Pinpoint Test E: P2535
Component Test(s)
Starter Motor - Positive Circuit Test
Starter Motor - Ground Circuit Test
General Procedures
Starter Motor Drive Gear and Flywheel Ring Gear Inspection
Activation
Removal And Installation
Starter Motor
Notes
Removal
Installation