Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2014 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1360 (Cruise Control System - Vehicles With: Adaptive Cruise Control) >> Diagnosis And Testing >> Cruise Control >> DTC Charts >> DTC Chart: Anti-Lock Brake System (ABS) Module

DTC Chart: Anti-Lock Brake System (ABS) Module

WARNING: This page is about a different car, the 2017 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
DTC Description Action
U0405:82 Invalid Data Received From Cruise Control Module: Alive/Sequence Counter Incorrect/Not Updated This DTC sets when the ABS module receives invalid network data from the CCM. RETRIEVE and REPAIR all non-network diagnostic trouble codes (DTCs) in the CCM.
U0405:83 Invalid Data Received From Cruise Control Module: Value of Signal Protection Calculation Incorrect This DTC sets when the ABS module receives invalid message data from the CCM. RETRIEVE and REPAIR all non-network diagnostic trouble codes (DTCs) in the CCM.
U2107:00 Collision Mitigation By Braking: No Sub Type Information This DTC sets in the ABS module due to long and too frequent collision mitigation brake requests from the CCM. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the CCM and other modules on the network.
U2108:62 Adaptive Cruise Control: Signal Compare Failure This DTC sets in the ABS module when the module detects over-braking during automated vehicle deceleration. If the vehicle deceleration exceeds the 1.0 m/s threshold, the DTC is stored and the adaptive cruise control is deactivated until the next ignition cycle. RETRIEVE and REPAIR all non-network diagnostic trouble codes (DTCs) in the CCM.
All other Diagnostic Trouble Codes (DTCs) - REFER to: Anti-Lock Brake System (ABS) and Stability Control .