Variable Camshaft Timing (VCT) Oil Control Solenoid

NOTE: It is necessary to remove the RH or LH valve cover to access the Variable Camshaft Timing (VCT) oil control solenoid. For additional information, refer to ENGINE -3.7L .

NOTE: Position the VCT oil control solenoid and tighten the bolts in 2 stages.

Stage 1: Tighten to 8 Nm (71 lb-in).
Stage 2: Tighten an additional 20 degrees.

NOTE: LH shown, RH similar.

Fig 1: Identifying Variable Camshaft Timing Oil Control Solenoid Related Components (3.7L)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	W500215	LH intake Variable Camshaft Timing (VCT) oil control solenoid bolt
2	6B297	LH intake VCT oil control solenoid
3	6B297	LH exhaust VCT oil control solenoid
4	W500215	LH exhaust VCT oil control solenoid bolt

Refer to the procedures and/or exploded views in this article for any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.