Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2014 >> Explorer Sport >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Cleaning >> General Procedure

General Procedure

NOTE: Refer to general specifications in the appropriate Engine article for the appropriate specification.
  1. NOTE: The connecting rod large end is a matched set. The connecting rod cap must be installed on the original connecting rod in the original position. Do not reverse the cap. Parts are not interchangeable.

    Mark and separate the parts and clean with solvent. Clean the oil passages.

    Fig 1: Locating Connecting Rod Large End Mark
    G06064085Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals