Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2014 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Information System And Entertainment System - Monochromatic Display) >> Removal And Installation >> Front Controls/Display Interface Module (FCDIM) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel upper trim panel.
    G08615344
  2. Remove the 2 bolts and the FCDIM.
    • Disconnect the electrical connector.
    • To install, tighten to 1.5 Nm (14 lb-in).
      G08615345
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals