Compressor to Condenser Discharge Line - 2.5L: Installation
WARNING: This page is about a different car, the 2013 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse the removal procedure.
- Install new O-ring seals and gasket seals.
- Add the correct amount of clean PAG oil to the refrigerant system. Refer to REFRIGERANT OIL ADDING .
- Evacuate, leak test and charge the refrigerant system. Refer to AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .