Hydraulic Control Unit (HCU): Removal

NOTE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.

NOTE: The HCU and ABS module are serviced as an assembly.

NOTE: Removal steps in this procedure may contain installation details.

If installing a new HCU /ABS module, upload the Anti-Lock Brake System (ABS) module configuration to the scan tool.
Refer to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
Refer to: BATTERY TRAY .
Torque : 159 lb.in (18 Nm)
Torque : 18 lb.ft (25 Nm)
Torque : 80 lb.in (9 Nm)