Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> Taurus SHO >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System (Battery, Mounting And Cables) >> Removal And Installation >> Battery Current Sensor >> Removal

Battery Current Sensor: Removal

  1. Remove the nut and position the negative battery cable terminal aside.
  2. Remove the ACL outlet pipe and cover. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
  3. Disconnect the battery current sensor electrical connector.
  4. NOTE: Note the orientation and position of the battery current sensor tape tab.

    Index-mark the battery cable at the battery current sensor. Remove and discard the tape securing the battery current sensor to the battery cable and remove the battery current sensor.

scientia non olet · About Mike's Workshop Manuals