Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> Mustang Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Battery Mounting & Battery Cables >> Specifications

Battery, Battery Mounting & Battery Cables: Specifications

MATERIAL SPECIFICATIONS

Item Specification Fill Capacity
Threadlock and Sealer
TA-25
WSK-M2G351-A5 -
GENERAL SPECIFICATIONS

Item Specification
Battery
Cold Cranking Amps (CCA) measured at -18°C (0°F) 590 CCA or 500 CCA (Boss® 302 only)
Voltage 12 volts
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Battery cable harness bracket bolt 15 - 133
Battery cable harness bracket nuts (5.0L, 5.8L) 9 - 80
Battery cable harness bracket-to-engine block nut (3.7L) 47 35 -
Battery cable harness-to-valve cover bracket nut (3.7L) 9 - 80
Battery cable terminal nut 10 - 89
Battery ground cable body terminal bolt 10 - 89
Battery ground cable-to-engine terminal nut (5.0L, 5.8L) 47 35 -
Battery ground cable-to-head terminal bolt (3.7L) 12 - 106
Battery hold-down clamp bolt 8 - 71
Battery Junction Box (BJB) terminal nut 10 - 89
Battery tray bolts 11 - 97
Generator B+ terminal nut 17 - 150
Lower battery cable harness bracket nut (5.8L) 8 - 71
Starter solenoid positive cable terminal nut 12 - 106
Starter solenoid wire terminal nut 5 - 44