Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Starting System - 1.6L) >> Diagnosis and Testing >> Starting System >> Symptom Chart(s) >> Symptom Chart: Auto-Start-Stop System

Symptom Chart: Auto-Start-Stop System

WARNING: This page is about a different variant/trim than selected.

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices.

REFER to: DIAGNOSTIC METHODS .

SYMPTOM CHART

Condition Possible Sources Actions
Auto-Start-Stop System is inoperative or does not operate correctly One or more required criteria required for Auto-start-stop operation has not been met. REFER to Owner's manual for proper system operation.
PCM  For PCM  Diagnostic Trouble Codes (DTCs), Refer to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) .
FCIM  For FCIM Diagnostic Trouble Codes (DTCs), Refer to the appropriate Information and Entertainment System - General Information for the procedure.
Auto-Start-Stop System cannot be disabled
  • Wiring, terminals or connectors
  • Auto-start-stop disable switch
  • FCIM 
Refer to the appropriate Information and Entertainment System - General Information for the procedure.