Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (Motor Driven Power Steering System) >> MDPS Column And Housing >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
  2. Conduct the "Steering Angle Sensor Reset (Only Column & Housing Assy replacement)" by Diagnostic tool.

    (Refer to MDPS Column and Housing - "DIAGNOSIS WITH DIAGNOSTIC TOOL ")

  3. Conduct the "Steering Angle Sensor (SAS) Calibration" by Diagnostic tool.

    (Refer to MDPS Column and Housing - "DIAGNOSIS WITH DIAGNOSTIC TOOL ")

  4. Conduct the "Set the steering feel torque to zero" by Diagnostic tool.

    (Refer to MDPS Column and Housing - "DIAGNOSIS WITH DIAGNOSTIC TOOL ")

  5. Conduct the "EPS Type Recognition" by Diagnostic tool.

    (Refer to MDPS Column and Housing - "DIAGNOSIS WITH DIAGNOSTIC TOOL ")

scientia non olet · About Mike's Workshop Manuals