Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1370 (Anti-Lock Brake System (Abs) And Stability Control) >> Removal And Installation >> Stability Assist/Traction Control Switch >> Removal

Stability Assist/Traction Control Switch: Removal

WARNING: This page is about a different car, the 2017 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the FCIM. Refer to: Front Controls Interface Module (FCIM) - Vehicles Without: SYNC . Refer to: Front Controls Interface Module (FCIM) - Vehicles With: SYNC Without Touchscreen . Refer to: Front Controls Interface Module (FCIM) - Vehicles With: Touchscreen Display . Refer to: Front Controls Interface Module (FCIM) - Vehicles With: Sony Audio System .
  2. Press the 2 tabs and remove the stability assist/traction control switch.
GFD174124Courtesy of FORD MOTOR COMPANY
scientia non olet · About Mike's Workshop Manuals