Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> Flex SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Engine Controls - Symptom Charts (Diesel)) >> Qt: Powertrain Control Module (Pcm) Quick Test >> Qt3 Carry Out The Pcm Quick Test

Qt3 Carry Out The Pcm Quick Test

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If unable to access the PCM or a scan tool communication concern exists, GO to PINPOINT TEST AE .

Are any DTCs present? 

Yes No
GO to DIAGNOSTIC TROUBLE CODE (DTC) CHARTS AND DESCRIPTIONS to diagnose the DTCs after noting the following:
DIAGNOSE the circuit related DTCs first. For multiple circuit DTCs that are set as a result of a concern with more than one component, REFER to the appropriate Wiring Diagrams article and IDENTIFY the common cause such as SIGRTN, VREF, or VPWR. CONTINUE DTC diagnosis by referring to the appropriately identified pinpoint test.
Any KOEO self-test DTCs
Any KOER self-test DTCs
Any continuous memory self-test DTCs.
Retrieve any available freeze frame data and disregard any identical or related continuous DTCs already repaired.
GO to NO DIAGNOSTIC TROUBLE CODES (DTCS) PRESENT SYMPTOM CHART INDEX  for direction to the symptom chart in NO DIAGNOSTIC TROUBLE CODES (DTCS) PRESENT SYMPTOM CHARTS .
If the symptom is not listed, REFER to the appropriate article to continue diagnosis.