Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> Fiesta Titanium, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Differential Shim >> Assembly

Differential Shim: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the selected differential bearing shim. If the differential bearings, differential, clutch housing or transaxle case were replaced, refer to DIFFERENTIAL SHIM SELECTION .
    Fig 1: Locating Clutch Housing Differential Bearing Shim
    G08867298Courtesy of FORD MOTOR CO.
  2. Using the special tools, install the differential bearing race.
    Fig 2: Installing Clutch Housing Differential Bearing Race Using Special Tools
    G08867299Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals