Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> F-150 Limited, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Charging System & Fuel Control System - 3.5L GTDI >> Removal And Installation >> Fuel Pump Control Module >> Removal and Installation

Removal and Installation

  1. Disconnect the Fuel Pump Control Module (FPCM) electrical connector.
  2. Remove the 2 bolts and the FPCM.
    • To install, tighten to 9 Nm (80 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals