Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> Explorer Police Interceptor, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System - EMTC >> General Procedures >> Air Conditioning (A/C) System Recovery, Evacuation and Charging >> Refrigerant System Charging

Refrigerant System Charging

  1. Lubricate the refrigerant system with the correct amount of clean Polyalkylene Glycol (PAG) oil. REFER to REFRIGERANT OIL ADDING .
  2. Connect a 199-00067 or 300-ROB34288 to the low-side and high-side service gauge port valves following the operating instructions provided by the equipment manufacturer.
  3. Set the refrigerant charge amount, and charge the refrigerant system following the instructions provided by the equipment manufacturer.
scientia non olet · About Mike's Workshop Manuals