DTC P0135: O2 Heater Circuit (Bank 1, Sensor 1)
DTC P0135: O2 HEATER CIRCUIT (BANK 1, SENSOR 1)
| Description: | This DTC sets when an open or short circuit is detected or the HO2S heater current draw exceeds a calibrated limit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Inspect the connectors for signs of damage, water ingress, or corrosion. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Fiesta, Transit Connect | GO to PINPOINT TEST DW . | ||
| All others | GO to PINPOINT TEST DZ . | ||