Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 351 (Engine System - General Information) >> General Procedures >> Valve Stem Diameter >> General Procedure

General Procedure

WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to general specifications in the appropriate Engine article for the appropriate specification.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown in illustration. Verify the diameter is within specification.
    Fig 1: Measuring Intake And Exhaust Valve Stem Diameter
    G06064097Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals