Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 342 (Information System And Entertainment System - Premium) >> Removal And Installation >> Front Controls Interface Module (FCIM) >> Removal

Front Controls Interface Module (FCIM): Removal

WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH  and RH  finish panel. REFER to INSTRUMENT PANEL
  2. Remove the 4 FCIM  screws.
    1. To install, tighten to 2 Nm (18 lb-in).
  3. Pull back on the FCIM  starting at the bottom and working to the top to release the clips and remove the FCIM  .
    1. Disconnect the electrical connector.
scientia non olet · About Mike's Workshop Manuals