DTC P0A50: Generator Position Sensor Circuit OVERSPEED
DTC P0A50: GENERATOR POSITION SENSOR CIRCUIT OVERSPEED
| Description: |
This DTC sets when the transmission generator exceeded its calibrated maximum RPM limit. |
| Possible Causes: |
- GR1 or GR2 circuit intermittent open
- GS1 or GS2 circuit intermittent open
- GC1 or GC2 circuit intermittent open
- GR1 or GR2 circuit intermittent short to ground
- GS1 or GS2 circuit intermittent short to ground
- GC1 or GC2 circuit intermittent short to ground
- GR1 or GR2 circuit intermittent short to voltage
- GS1 or GS2 circuit intermittent short to voltage
- GC1 or GC2 circuit intermittent short to voltage
- Damaged transmission
|
| Diagnostic Aids: |
|
| Application |
Key On Engine Off |
Key On Engine Running |
Continuous Memory |
| All |
GO to PINPOINT TEST TO
. |