Reverse Clutch: Disassembly

Remove the reverse clutch pressure, friction and steel plates.
1. Remove the retaining ring.
2. Remove the plates.
  
  Fig 1: Identifying Retaining Ring And Plates
  Courtesy of FORD MOTOR CO.
Using the Clutch Spring Compressor, remove the reverse clutch piston return spring retainer ring and retainer.

Fig 2: Removing Reverse Clutch Piston Return Spring Retainer Ring And Retainer
Courtesy of FORD MOTOR CO.
Remove the reverse clutch piston return spring.

Fig 3: Locating Reverse Clutch Piston Return Spring
Courtesy of FORD MOTOR CO.
Remove the reverse clutch piston assembly.

Fig 4: Locating Reverse Clutch Piston Assembly
Courtesy of FORD MOTOR CO.

NOTE: If damage is found to the reverse clutch piston seals, install a new reverse clutch piston.

Fig 5: Locating Drum Inner And Outer Seals

Courtesy of FORD MOTOR CO.