Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Taurus SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 2018 (Information System And Entertainment System) >> Removal And Installation >> Steering Wheel Controls >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Using a suitable tool such as a flat-bladed screwdriver, pry the steering wheel controls from the steering wheel.
    • Disconnect the electrical connector.
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals