Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Taurus SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1267 (Information System And Entertainment Systems) >> Removal And Installation >> Audio Unit >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For 6-CD audio units, it is not necessary to remove the audio unit to retrieve the part number. For additional information, refer to Audio Unit Part Number Retrieval .
  1. Using the special tool, pull the audio unit out.
  2. Remove the audio unit.
    • Disconnect the antenna lead-in cable and the electrical connectors.
  3. Fig 1: Removing Audio Unit
    GF0012865Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.