Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Taurus SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1066 (Front Drive HALFSHAFTS) >> Removal And Installation >> Constant Velocity (CV) Joint Boot >> Notes

Constant Velocity (CV) Joint Boot: Notes

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0003334
Installer, Constant Velocity Joint Boot Clamp 205-343 (T95P-3514-A)
Fig 1: Exploded View Of Constant Velocity (CV) Joint Boot
GF0031508Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Low profile large inboard boots inner clamps (serviced in 3A331 kit only)
2 - Low profile small inboard boots (serviced in 3A331 kit only)
3 - Intermediate shaft boot clamps (serviced in 3A331 kit only)
4 - Outboard boot outer clamps (serviced in 3A331 kit only)
5 - Outboard CV joint boots (serviced in 3A331 kit only)
6 - Inboard CV joint boots (serviced in 3A331 kit only)