Vehicle Dynamics Module (VDM): Removal

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

NOTE: The Vehicle Dynamics Module (VDM) is mounted to the LH side of the cargo area behind the rear quarter trim panel.

1.

Remove the rear quarter trim panel. Refer to Interior Trim and Ornamentation .

2.
- To install, tighten to 3.2 Nm (28.3 lb-in).

Courtesy of FORD MOTOR COMPANY