Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Powertrain DTC Charts & Descriptions (Diesel)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> P060B - Internal Control Module A/D Processing Performance

P060B - Internal Control Module A/D Processing Performance

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
P060B - INTERNAL CONTROL MODULE A/D PROCESSING PERFORMANCE

Description:  Indicates an error occurred in the powertrain control module (PCM).
Possible Causes: 
  • Module reprogramming
  • Damaged PCM
Diagnostic Aids:  Verify the PCM is at the latest calibration level.
Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.
scientia non olet · About Mike's Workshop Manuals