Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1345 (Engine System - General Information) >> General Procedures >> Valve Stem Diameter

Valve Stem Diameter

WARNING: This page is about a different car, the 2017 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Check 

NOTE: Refer to the appropriate Engine Article for the specification.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown below. Verify the diameter is within specification.
GFD174256Courtesy of FORD MOTOR COMPANY
scientia non olet · About Mike's Workshop Manuals