Downshift Paddle Switch: Removal

WARNING: This page is about a different car, the 2017 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

1.

Remove the driver airbag. REFER to: Driver Airbag .

2.

Remove the downshift paddle switch.
1. 1.
  
  Disconnect the electrical connector.
1. 2.
  
  Remove the retainer and the downshift paddle switch.
  Torque: 44 lb.in (5 Nm)

Courtesy of FORD MOTOR COMPANY