Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Fusion S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Controls - Powertrain DTC Charts & Descriptions (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC U0129: (TCM) Lost Communication With Brake System Control Module

DTC U0129: (TCM) Lost Communication With Brake System Control Module

WARNING: This page is about a different variant/trim than selected.
U0129 (TCM) - LOST COMMUNICATION WITH BRAKE SYSTEM CONTROL MODULE

Description:  The transaxle control module (TCM) continuously monitors the controller area network (CAN) for messages from the anti-lock brake system (ABS) module. This DTC sets when the TCM does not receive the ABS message within the defined amount of time.
Possible Causes: 
  • CAN circuit
Diagnostic Aids:  Network DTC concerns occur during module-to-module communication. Refer to the appropriate Module Communications Network article, Communication Network DTC Chart to continue diagnosis.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.