Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Fusion S, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Removal And Installation >> Generator - 3.0L >> Removal and Installation

Removal and Installation

  1. Remove the A/C compressor. For additional information, refer to CLIMATE CONTROL .
  2. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  3. Position the generator protective cover aside, remove the nut and position the generator B+ terminal aside.
    • To install, tighten to 12 Nm (106 lb-in).
  4. Disconnect the generator electrical connector.
  5. Remove the 3 bolts and the generator.
    • To install, tighten to 47 Nm (35 lb-ft).
  6. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals