DTC P0141: O2 Heater Circuit (Bank 1, Sensor 2)
P0141 - O2 HEATER CIRCUIT (BANK 1, SENSOR 2)
| Description: This DTC sets when the current draw exceeds a calibrated limit or an open or short circuit is detected. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Inspect the connectors for signs of damage, water ingress, or corrosion. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DW . | ||