Possible Sources
WARNING: This page is about a different variant/trim than selected.
- Connectors damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals
- Communication error
- Low battery condition
- Battery recently replaced
- BJB fuse 13 (40A)
- Secondary OBD Module A
- PCM
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U019B:00 | Lost Communication With The Battery Charger Control Module | After the PCM , Secondary OBD Module A wake up the PCM did not detect a response from the Secondary OBD Module A. |