Possible Sources
WARNING: This page is about a different variant/trim than selected.
- Connectors damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals
- Communication error
- Low battery condition
- Battery recently replaced
- RJB fuse 1 (5A)
- TCU
- PCM
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0198:00 | Lost Communication With The Telematic Control Unit Module (TCU) | After the PCM , TCU wake up the PCM did not detect a response from the TCU . |