Possible Sources
WARNING: This page is about a different variant/trim than selected.
- Connectors damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals
- High voltage components
- High voltage connector C1822B shorting bars installed properly
- PCM
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0A0A:01 | High Voltage System Interlock Circuit General Electrical Failure | The PCM detects greater than 4.9 volts or less than 0.1 volt at the high voltage interlock sense input. |