Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Fiesta SES, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transaxle (IB5)) >> Disassembly And Assembly Of Subassemblies >> Input Shaft >> Disassembly

Input Shaft: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Using the special tools, remove and discard the bearing.
    Fig 1: Removing Bearing Using Special Tools
    G07980098Courtesy of FORD MOTOR CO.
  2. Using a suitable tool, remove and discard the bearing.
Fig 2: Removing Bearing Using Suitable Tool
G07980099Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals