Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Control - Select Shift >> DTC And Symptom Chart(S) >> Symptom Chart(s) >> Symptom Chart: Automatic Transmission - External Controls

Symptom Chart: Automatic Transmission - External Controls

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to DIAGNOSTIC METHODS for information regarding Ford-specific diagnostic practices.

SYMPTOM CHART

Condition Possible Sources Actions
  • Brake shift interlock system does not release/lock correctly
  • Circuitry shorted to ground
  • Fuse 18 (10A)
  • BCM
  • BSIA
  • SelectShift ™ does not operate correctly
  • Circuitry open/shorted
  • PCM
  • SelectShift ™ switch
  • Selector lever linkage is out of correct gear relationship
  • Selector lever linkage out of adjustment
  • Manual control lever not aligned correctly on the sensor (flat surfaces do not line up)
  • Loose selector lever cable bracket
  • Vibration - a high frequency (20-80 Hz) that is felt through the seat or selector lever. Changes with engine speed
  • Selector lever cable grounded out or loose