Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Engine System - General Information) >> General Procedures >> Connecting Rod Large End Bore >> General Procedure

General Procedure

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to General Specifications in the appropriate engine service information for the specification.
  1. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
    G07958422
scientia non olet · About Mike's Workshop Manuals