Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (OEM Connector Repair Procedures) >> Connector Repair Procedures >> Partially Mated Connectors

Partially Mated Connectors

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Seal
  2. Displaced tab
  3. Female half
  4. Seal
  5. Intermittent contact
  6. Male half
  7. Intermittent contact

Lock may be displaced into an unlocked position; pull on the connector to verify the lock.

Fig 1: Identifying Partially Mated Connectors
G08748258Courtesy of FORD MOTOR CO.