Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats-Seating - 1ST Row >> Removal And Installation >> Driver Seat Module (DSM) >> Installation

Driver Seat Module (DSM): Installation

  1. Connect the DSM electrical connectors.
  2. Position the DSM and install the 2 screws.
  3. NOTE: This step is necessary only if the DSM is being replaced.

    PMI is required when installing a new DSM. Refer to the scan tool instructions to carry out PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .

scientia non olet · About Mike's Workshop Manuals