Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Universal Transmitter - Universal Home Transmitter >> Diagnostic Routine(S) >> Diagnostic Routine A >> Pinpoint Test

Pinpoint Test

  1. CHECK FOR VOLTAGE TO THE UNIVERSAL TRANSMITTER
    1. Check the illumination of the universal transmitter by pressing one of the buttons.

    Does the red indicator on the universal transmitter illuminate? 

    • Yes: GO to 2  .
    • No: GO to  3.
  2. PROGRAM A HAND-HELD TRANSMITTER TO THE UNIVERSAL TRANSMITTER
    1. NOTE: The customer's hand-held transmitter is required when programming the universal transmitter.

      Program the universal transmitter. Refer to the Owner's Literature.

    Does the universal transmitter program successfully? 

    • Yes: The universal transmitter is OK. VERIFY the receiver unit operates correctly.
    • No: INSTALL a new LH sun visor. REFER to HEADLINER .
  3. CHECK THE OPERATION OF THE LH VANITY MIRROR LAMP
    1. Verify the operation of the LH vanity mirror lamp. REFER to DEMAND LAMPS .

    Does the LH vanity mirror lamp operate correctly? 

    • Yes: INSTALL a new LH sun visor. REFER to HEADLINER .
    • No: REFER to DIAGNOSTIC ROUTINE O : One Or More Demand Lamps Are Inoperative to continue diagnosis.
scientia non olet · About Mike's Workshop Manuals